You should never disregard the airbag light on your dashboard. Your car's Supplemental Restraint System (SRS) has identified a problem and may disable your airbags if the airbag light is flashing, airbag light blinking, or remaining steady.

This article will teach you how to safely clear the airbag light, what causes it, when it's safe to reset it yourself, and when components like the airbag control module need to be replaced.

What Does the Airbag Light Mean?

The airbag light indicator turns on when the vehicle’s computer detects a malfunction in the airbag system. This could be related to sensors, wiring, seat occupancy systems, or the airbag control module itself.

If the airbag light blinking or flashing occurs:

• The system may be completely disabled

• Airbags may not deploy in an accident

• Your vehicle may fail inspection in many states

Learn more about SRS systems from a trusted source:

Common Reasons Why the Airbag Light Is On

Here are the most common causes of an airbag light flashing issue:

1. Faulty Airbag Control Module

System problems and crash data are stored in the airbag control module. It frequently locks itself after an accident and needs to be reset or replaced.

2. Loose Seat Wiring

Under-seat wiring can loosen due to seat movement, causing the airbag light indicator to turn on.

3. Deployed or Damaged Airbags

If airbags have deployed or are missing, the system detects resistance issues.

Used OEM Airbags for Sale – Tested & Guaranteed
https://www.usairbags.com/collections/airbags

4. Low Battery or Voltage Issues

A weak battery can trigger the airbag light blinking, especially after jump-starting a vehicle.

5. Seat Occupancy Sensor Failure

This sensor determines passenger presence and is a very common failure point.

How to Clear Airbag Light (Step-by-Step)

Method 1: Use an OBD2 Scanner (Best & Safest)

Plug an OBD2 scanner that supports SRS/Airbag systems

Turn ignition ON (engine off)

Read the airbag fault codes

Fix the underlying issue

Clear the codes

 Clearing codes without fixing the issue will cause the airbag light to come back.

Method 2: Check Under-Seat Connections

1. Turn the car OFF and disconnect the battery

2. Slide seats fully back

3. Inspect yellow/orange airbag connectors

4. Secure loose wiring

5. Reconnect battery and start the car

This often fixes airbag light flashing caused by seat wiring.

Method 3: Replace or Reset the Airbag Control Module

If your vehicle was in an accident, the airbag control module usually stores crash data permanently.

Airbag Control Modules – OEM & Plug-and-Play
https://www.usairbags.com/collections/airbag-control-modules

Buy Tested OEM Airbags Online – Restore Your Vehicle’s Safety

Your airbag light is typically a sign of a malfunctioning or deployed airbag that has to be replaced if it stays on even after troubleshooting. At USAirbags, we specialize in providing tested OEM used airbags and airbag control modules at affordable costs for a variety of automobiles. Before being shipped, every airbag is carefully examined for performance, compatibility, and safety. Visit our website to peruse our selection, locate the ideal airbag for your automobile, and confidently and peacefully restore your car's safety system.

Concluding Remarks

For car safety, inspections, and peace of mind, knowing how to clear the airbag light is crucial. While small faults can be resolved with easy modifications like wiring inspections, issues with the airbag control module or deployed airbags call for proper replacement, not short cuts.

If your airbag light continues to blink, it indicates that the system requires more than just a reset.

FAQs, or frequently asked questions

 Is it possible to drive while the airbag light is on?

You can drive, but it's not safe. The airbag system may be deactivated and may not deploy in an accident if the airbag light or airbag light indicator is on. It is advised to identify and resolve the problem as soon as feasible.

 Why does the airbag light blinking or flash?

A major issue with the SRS system is typically indicated by an airbag light blinking or flashing. Low battery voltage, loose seat wiring, malfunctioning airbag control modules, and deployed airbags are common causes.

Will the airbag light go out if the battery is disconnected?

The airbag light may be momentarily turned off by disconnecting the battery, but this won't resolve the fundamental problem. When the system finds the problem again, the airbag light will typically switch back on.

 What is the price of fixing an airbag light?

The problem determines the cost. While replacing an airbag control module or airbags following an accident can be more expensive, minor wiring problems can be less expensive. Purchasing new parts is frequently more expensive than using tested OEM old airbags.